Fusion Finish & Accent
Tung Oil | Fusion Mineral Paint
Tung Oil | Fusion Mineral Paint
Tung Oil.
Excellent water resistant protection for wood or Milk Painted surfaces, especially for exterior application.
Tung Oil offers excellent water resistant protection for wood or Milk Painted surfaces - especially with exterior applications.
Tung oil is a natural drying oil extracted from the seed of the tung tree, a tree native to China and other Asian countries.
Versatile, easy to use and environmentally friendly, it's been used for centuries as a water resistant finish for boats and other wooden objects as well as stone. It's a popular choice as it does not darken, mold or go rancid.
Please make sure to read all instructions prior to application.
HOW TO USE IT
Clean and prep your surface
Prep is your friend! make sure your surface is clean, these natural oil finishes won’t penetrate polyurethane or varnish so you would need to remove that by sanding.
Cut the Oil with Mineral Spirits
Thinning the oil with odorless solvent helps it penetrate the surface and speeds up the dry time. Subsequent coats can be full strength but must be wiped down after 15 minutes. Always allow ample drying time (48 hours+). Using it without the solvent the dry time is longer. If a solvent has been used cut the Tung Oil it is no longer a food-safe finish.
Applying the oil
After the surface has been prepped by removing any debris, or unwanted previous poly coating, you may proceed to apply the Tung Oil finish. Apply the Tung Oil generously with a brush or cloth. Let the wood soak in the Tung Oil for approximately 5-10 minutes. Remove the excess Tung Oil within 10 minutes of application, if you leave the Tung Oil on for too long and it dries it may go sticky and tacky, you don’t want the Tung Oil to start drying on the surface you want all the excess removed.